![]() ![]() Abrasive cleaners, polishes or rubbing compounds will remove the RejeX film. If a RejeX-treated surface needs repainting, normal paint preparation is all that’s required. It should also be noted that many waxes (particularly those products described as "restorer waxes") and all polishes contain abrasives, which can strip the thin RejeX film. Waxes can be applied over RejeX, however many of the benefits of RejeX may be negated and the wax finish will typically not last very long due to adhesion limitations. RejeX can be used over existing wax, however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly. RejeX can be applied in multiple coats – allowing at least 4 hours curing time between coats – for greater depth of gloss and extended longevity. If you use a buffer, do not apply RejeX with pressure, simply use the buffer to spread out (and/or wipe off) the product. If a painted / gelcoat surface is worn/oxidized, polish to remove "dead" oxidized paint and gel coat / fiberglass before applying RejeX.īuffers work just fine for applying / removing RejeX. RejeX SHOULD NOT be used on porous surfaces, highly textured surfaces (such as the plastic/rubber trim on some SUVs), oxidized painted surfaces or oxidized (chalky) gelcoat/fiberglass. It is very important to allow RejeX to cure for 8-12 hours after the haze has been wiped off for optimal protection. RejeX contains none of the free silicone oils found in some other polymer products that are known to contaminate paint and cause issues when repainting.Īs RejeX cures, the polymers cross-link into a crystal-clear, flexible, chemical- and contaminant-resistant matrix.RejeX has recently been awarded the GSA National Stock Number 8030-0 for use on all NATO vessels armed with the AEGIS defense system.RejeX can also be applied to windshields (glass, Lexan, acrylic, etc.) to repel rain and make bugs splats easier to remove.it is even effective against the dreaded love bugs! RejeX also provides exceptional UV protection. This very thin film, only tenths of a micron thick, reduces adhesion of all common contaminants such as road grime, exhaust, oil, bug splats, bird droppings, brake dust, tree sap, pollen, tar and grease. The product dries water clear, and unlike wax-based products, never yellows. This highly durable coating produces a deep, lustrous shine that outlasts other products by months. RejeX has a higher refractive index than any wax, so it produces richer, deeper looking colors. RejeX is commonly used as a paint sealant providing a better performing alternative to wax-type products for owners who want to maximize protection and shine on vehicles of all sorts, including aircraft, cars, motorcycles, boats and RVs. RejeX® is a proprietary thin film polymer coating technology designed to provide a high-gloss / ultra-high-release surface. when bugs and other contaminants begin sticking to leading edges of wings and front bumpers, when brake dust begins sticking more tenatiously to wheels, etc.).NOTHING STICKS BUT THE SHINE!™ NOT FOR SALE OR USE IN CALIFORNIA. While it it not uncommon for a RejeX treatment to last well over a year, for optimum protection, reapply every 6 months or as needed (e.g.The higher the humidity, the faster RejeX cures. Allow RejeX to cure for 8-12 hours out of the elements.Unlike waxes that require strenuous rubbing or buffing to remove, RejeX should wipe off easily. After RejeX dries to a haze (about 10-20 minutes), wipe off with a clean cloth.On hot days, we recommend RejeXing in the shade, early morning or in the afternoon. ![]() Apply to a clean, dry surface that is cool to the touch. Avoid appling in direct sunlight when ambient temperatures are greater than 85° F. ![]() ![]() ![]()
0 Comments
Leave a Reply. |